SANCora® TIMBER@Guard Polyurethane Wood Stain is specially formulated for enhance the natural beauty of wood and protects it against wood rot and mould growth by its penetrative properties. It is suitable for use on all types of new or previously treated interior hard and soft woods. It gives an extremely durable and flexible finish with excellent abrasion resistance and will not peal, crack or blister.

Usage:
Recommended for use on cane or wooden furniture, door paneling, partition and parquet flooring.
Technical Data:
Texture: High Gloss Smooth Finish
Theoretical Coverage: Appro. 16 – 18m2 / litre (Depending on surface evenness)
Drying Time: Single coat at standard thickness (28 degree Celsius, 50% RH) Touch Dry 3hrs, Hard Dry 8hrs
Recoating Time: 6hrs
Thinner / Cleaner: Mineral Spirit

Surface preparation (General / New)
Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax. To have a better finish, rubbed down surface in the direction of the grain using suitable abrasive and dust off. If necessary, fill the wood grain with appropriate filler and smoothen with abrasive.

Surface preparation (Previously Painted)
Remove all loose, defective, unstable and existing paint film to bare wood. Rubbed down surface in direction of the grain. If necessary, apply wood grain filler to fill the crack and smoothen with abrasive. Seal the surfaces with SANCora® TIMBER@Guard Polyurethane Wood Stain. Thin down with 10 – 20% mineral spirit.

SANCora® TIMBER@Guard Polyurethane Wood Stain is specially formulated for enhance the natural beauty of wood and protects it against wood rot and mould growth by its penetrative properties. It is suitable for use on all types of new or previously treated interior hard and soft woods. It gives an extremely durable and flexible finish with excellent abrasion resistance and will not peal, crack or blister.

Usage:
Recommended for use on cane or wooden furniture, door paneling, partition and parquet flooring.
Technical Data:
Texture: High Gloss Smooth Finish
Theoretical Coverage: Appro. 16 – 18m2 / litre (Depending on surface evenness)
Drying Time: Single coat at standard thickness (28 degree Celsius, 50% RH) Touch Dry 3hrs, Hard Dry 8hrs
Recoating Time: 6hrs
Thinner / Cleaner: Mineral Spirit

Surface preparation (General / New)
Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax. To have a better finish, rubbed down surface in the direction of the grain using suitable abrasive and dust off. If necessary, fill the wood grain with appropriate filler and smoothen with abrasive.

Surface preparation (Previously Painted)
Remove all loose, defective, unstable and existing paint film to bare wood. Rubbed down surface in direction of the grain. If necessary, apply wood grain filler to fill the crack and smoothen with abrasive. Seal the surfaces with SANCora® TIMBER@Guard Polyurethane Wood Stain. Thin down with 10 – 20% mineral spirit.

Product Features:
- Linear control of light level
- Energy Saving
- Modular concept for flexible combinations
- Suitable for incandescent lamps (up to 500w) and halogen lamps (up to 300w)

Recommended number of light bulbs
25w - max. 20 bulbs
40w - max. 12 bulbs
60w - max. 8 bulbs
100w - max. 5 bulbs

Description:
A blue colour, all purpose, medium strength threadlocker formulated for locking and sealing of threaded fasteners which require normal disassembly with standard hand tools. It cures when confined in the absence of air between close fitting metal surfaces. It locks bolts and nuts up to 20 mm diameter, preventing loosening due to vibration, and sealing against leakage and corrosion. It can work on lightly oiled surface and is chemical resistant, resisting fuels, lubricants and most industrial liquid and gases.

Benefits:
- Prevent loosening due to vibration
- Work on lightly oiled surfaces
- Locks bolts and nuts up to 20 mm diameter
- Chemical resistant, resisting fuels, lubricants, most industrial liquid and gases

Applications:
Replace lock washers and plastic insert. Lock machine tool access bolts, nuts and hydraulic system bolts. Use on gear box bolts / driveshaft, bearing cover cap screws, counter sunk screws, conveyor roller bolts. It is also ideal for bolts on valve and cam covers, oil pans, disc brake calipers, intakes, alternators and pulley assemblies.